1up Racing - 1UPTC7.2
The Dynamic Toe Control 0/+2mm Offset Set provides you with all the parts needed to switch your “DTC” system to 0, or +2mm offset.
The standard “DTC” knuckles feature +1mm offset which is desirable when running little to no inboard toe. 0 offset is preferred when running a wide inner pivot setting or narrow track width, and has the same geometry as the stock hub carrier. +2mm is preferred when running a narrow inner pivot setting or wide track width.
- Custom Machined DTC Knuckles (x2)
- 5x10x3mm Bearings (x2)
- 5x1mm Axle Spacers (x2)